Learn about the TOOCAA laser module

TOOCAA laser module installation tutorial

Step 1 Turn off the machine power.

Step 2 Pull the tool lock arm upward to open the X-axis motion assembly.

Step 3 Move the laser module down along the carriage.

Step 4 Press the tool lock arm down to secure the laser module.

Step 5 Connect the USB signal cable and tighten the screws.

TOOCAA laser module removal tutorial

Step 1 Turn off the machine power.

Step 2 Remove the USB signal cable after unscrewing the screws.

Step 3 Pull the tool lock arm upward to open the X-axis motion assembly.

Step 4 Slide the laser module upward along the carriage to remove it.  

FAQ

1. The laser module cannot be effectively fixed / the laser module is easy to slip

Solution steps:

1. Take out the laser module.2. Remove the outer screw and the tool lock arm.

3. Adjust the tightness of the screw inside the tool carriage.
TIPS：Clockwise adjustment is for tightening, and counterclockwise adjustment is for loosening. Please adjust according to the actual situation.

Tighten clockwise

Loosen counterclockwise